

Series 3300 Mercury CEM
By Tekran
Cemtek has partnered with Tekran to bring our clients the Series 3300 Mercury CEM. This continuous mercury monitoring system (CMMS) is in place at over 200 sources in the U.S and every installation has met and exceeded all performance requirements for their respective state and federal regulations.
The Series 3300 systems have leapt to the forefront of the Mercury (Hg) CEM Industry. It can measure total elemental and ionic mercury in virtually any combustion source.
It is immune to the interferences that plague conventional mercury CEMs and is sensitive enough to measure Hg levels at any coal-fired power plant.
Unlike other systems, which use atomic absorption (AA), the Tekran Series 3300 is not cross sensitive to other gases. It is unaffected by SO2, NOX, CO, HCl and all other common combustion by-products.
Its unique combination of gold pre-concentration, followed by atomic fluorescence detection provides both extremely high sensitivity and outstanding freedom from matrix effects.
With multiple configuration options available and a proven track record, the Tekran Series 3300 is one of the most reliable, precise, and accurate Hg CEMs technologies available today.
Contact a Cemtek representative today to discus how this remarkable technology could help your facility meet and exceed regulatory requirements.
Patented mercury speciation technology to determine elemental, ionic and total mercury
Provides real-time feedback for mercury control technology optimization
Unaffected by SO2, NOX, CO, HCl and all other common combustion by-products
Interfering acid gases removed without chemical reagents or solid sorbents
Detection limit less than 0.05 ug/m3, with rapid response time
Low-cost calibration eliminates expensive mercury calibration gas cylinders
No chemical reagents required
Multiple configurations available (see below)
EPA 40 CFR Part 75
EPA PS-12A
Fossil fuel combustion sources
Metal production
Industrial and Artisanal gold production
Cement production
Chlor-alkali industry
Waste incineration
Series 3300 Mercury CEM
By Tekran
Cemtek has partnered with Tekran to bring our clients the Series 3300 Mercury CEM. This continuous mercury monitoring system (CMMS) is in place at over 200 sources in the U.S and every installation has met and exceeded all performance requirements for their respective state and federal regulations.
The Series 3300 systems have leapt to the forefront of the Mercury (Hg) CEM Industry. It can measure total elemental and ionic mercury in virtually any combustion source.
It is immune to the interferences that plague conventional mercury CEMs and is sensitive enough to measure Hg levels at any coal-fired power plant.
Unlike other systems, which use atomic absorption (AA), the Tekran Series 3300 is not cross sensitive to other gases. It is unaffected by SO2, NOX, CO, HCl and all other common combustion by-products.
Its unique combination of gold pre-concentration, followed by atomic fluorescence detection provides both extremely high sensitivity and outstanding freedom from matrix effects.
With multiple configuration options available and a proven track record, the Tekran Series 3300 is one of the most reliable, precise, and accurate Hg CEMs technologies available today.
Contact a Cemtek representative today to discus how this remarkable technology could help your facility meet and exceed regulatory requirements.
Patented mercury speciation technology to determine elemental, ionic and total mercury
Provides real-time feedback for mercury control technology optimization
Unaffected by SO2, NOX, CO, HCl and all other common combustion by-products
Interfering acid gases removed without chemical reagents or solid sorbents
Detection limit less than 0.05 ug/m3, with rapid response time
Low-cost calibration eliminates expensive mercury calibration gas cylinders
No chemical reagents required
Multiple configurations available (see below)
EPA 40 CFR Part 75
EPA PS-12A
Fossil fuel combustion sources
Metal production
Industrial and Artisanal gold production
Cement production
Chlor-alkali industry
Waste incineration



CEMTEK is dedicated to providing quality,
on time, and professional CEMS services.
Whether your needs are for CEMS Parts or
daily CEMS. Whether your needs are for
CEMS maintenance and visits or weekly,
monthly, quarterly, or annual maintenance
visits, our technicians can handle it all.
We provide services throughout the
United States and abroad.
PARTS / SERVICES



CEMTEK is dedicated to providing quality,
on time, and professional CEMS services.
Whether your needs are for CEMS Parts or
daily CEMS. Whether your needs are for
CEMS maintenance and visits or weekly,
monthly, quarterly, or annual maintenance
visits, our technicians can handle it all.
We provide services throughout the
United States and abroad.