Continuous Mercury Monitoring Systems


Cemtek has engineered, built, factory tested, shipped and started-up multiple Continuous Mercury Monitoring Systems (CMMS)


We have partnered with leading manufacterurers in the field of Mercury Analysis Systems in order to offer our clients multiple solutions to their facility’s needs.


Our engineers can solve your Mercury monitoring requirements with a custom engineered CMMS that can include a full CAA Part 75 or a Part 60 CEMS. 


Proven CMMS Design
Some of our past CMMS installations have been combined with new dilution extractive CEMS and other components.  Another option is to combine the Mercury CMMS in a shelter with analyzers for compliance or combustion. This can be added to your existing DAS or we can configure a new DAS of your choice into the Mercury CMMS.


What ever your current set up and needs, we will will develop and implement a plan for your company.


For your complete mercury monitoring and measurement solutions, contact one of our mercury experts.

This complete Mercury CEMS solution includes the following:

  • Mercury Analyzer

    The mercury analyzer is based upon atomic fluorescence. An advanced cold vapor atomic fluorescence design provides continuous sample measurement, with no additional gases or pre-concentration required and virtually no interference from SO2. Detection limits down to 1.0 ng/m3 allow high sample dilution (100:1) minimizing moisture, heat and interfering pollutants.

  • Mercury Calibrator

    The elemental mercury calibrator was developed using a Peltier cooler/vapor pressure control and mass flow controllers. The mercury concentration output range is currently 0.1 µg/m3 to 300 µg/m3. This range allows the operator to directly calibrate the analyzer at post-dilution concentrations and dynamically spike into the sampling probe.

  • Zero Air Supply

    The mercury analyzer is designed for use with a dilution probe. The zero air supply provides dry, mercury-free dilution air to the probe, zero gas for analyzer calibrations, and air to the mercury calibrator.

Contact a Cemtek Representative for more information or to request a quote.