2016 Emissions Monitoring Seminar and Training (EMST)
The Cemtek's 2016 Emissions Monitoring Seminar and Training (EMST) Users Group was held at the Hilton Orange County/Costa Mesa, in beautiful Southern California.
The Cemtek Environmental EMST was coordinated by our very own staff of senior level CEMS specialists, as well as expert guest speakers, and provided our customers with training on the latest and greatest existing and emerging technologies available for compliance and process improvement.
If you were unable to make it to this years event it is not too late to receive the benefits of our expertise. Below we have added many of the informative presentations that our attendees were privy too. Feel free to peruse or download them at your convenience. If you have any questions or require clarification, feel free to contact us and we will be happy to assist you.
For those of you who were in attendance at our 2016 User's Group Seminar & Training Event, Cemtek would like to express our gratitude for making it such a success and for all the wonderful feedback we received. Your comments and suggestions always weigh in heavily in our curriculum and planning for this event.
We look forward to seeing you all (and hopefully some new faces) in 2018.
All the best,
CEMTEK Team
Gas Turbines: Sub 2 ppm NOx Compliance Challenges and CARB Update
Gas Turbine technological feasibility and its national impact on BACT, compliance challenges, SCR and CO catalysts, excess emissions and causes of failure
10 Steps to wrapping up power projects and upgrades
By Joanne Randall, Randall Environmental, LLC
CII NOx Probes AP2E Cavity Ringdown Laser Technology
Applications and Technology, Basic Components, Analyzer Controller, Dilution Probe Enclosure, AP2E Patented System, etc.
Expanded Measurement needs for Process Control and Compliance (Key Note)
Impact of 'disruptors', laser based measurements, applications examples (SCR and HCl)
Gas Turbine & Industrial SCR Systems
Lessons Learned Firing NG and ULSD in Large Frame Simple Cycle Gas Turbine Hot SCR Systems
Maintenance of Continuous Emissions Mercury Monitoring Systems
Maintence of (HgCEMS) Under the U.S. EPA PC MACT and EGU MATS Rules
Multi Point Probes to Mitigate Stack Stratification by Bernadette Shahin
Why Use a Multipoint Probe, Regulatory History, Gas Laws, Probe Selection Criteria, Anatomy of a Multi Point Probe, Performance Testing, QA, Maintenance
NESHAP CEMS Challenges by David Rib and Keith Shannon
By David Rib and Keith Shannon, Mitsubishi Cement Corporation
NH3 Compliance with Unisearch TDL
What is a tunable diode laser (TDL), theory, General overview of a TDL system, Navigating LasIRView software
NOx Reduction by SCR with Ceramic Filters
NOx Treatment by Selective Catalytic Reduction with Catalytic Ceramic Filter Elements
NOx Troubleshooting and Optimization of Combined Cycle SCR Systems
How to Distinguish NH3 Maldistribution from Bypass, AIG Tuning, Identifying Flue Gas Bypass, Catalyst Management/Measuring
PC MACT 2016 Updates
Overview of applicable AQ requirements, emissions and emission sources, PC MACT regulations and updates
Design and Engineering For PetroChem Processes
Application Analysis, CEMS Design, CEMS Components, Sample Conditioning System, Analytical Techniques, and more.
Considerations in Process Sample Systems
Best Practices for Installation of Gaseous Sample Pumps
Petrochemical Sample Probes and Sample Systems for Gas Analysis
By Bob Bertik, Universal Analyzers/O'Brien Analytical
PM CEMS: PS11 and Field Experience
Brief History of PM CEMS, Overview of PS-11 and CPMS, Field Experience, Lessons Learned, Success Stories
Sorbent Trap Monitoring Systems
Lessons Learnt from MATS and PC MACT compliance
NH3, HCI, and Hg Calibration Gases and HCl Systems
HCl Gas Delivery Panel Systems. Status and Stability of NH3, HCI, and Hg Calibration Gases.
Thermo Mercury Freedom CEMS
Overview, Block diagram, Flow Schemes, Hg Fluorescence, Calibrator, Probes, QA requirements